Surface Conditioning (SCM) Tube Finishing Belts

Surface Conditioning (SCM) Tube Finishing Belts
Size (Length x Width):  
Grade:  
Pack Size:  
Our Price:  £57.80
List Price:  £68.00
Saving Of:  £10.20 (15%)
(Exc. 20% VAT)
+

Model:  BT.SC.CO.533x30.G
Brand:  Cibo

Cibo

Applications: Surface conditioning material gives a high level of consistency in applying brushed or satin finishes to stainless steel as well as other metals. They are thus popular as the end process in finishing systems where a efficiency and consistency are important. They will remove blemishes and surface discolouration. Providing they are not excessively used to remove burrs, they will give a long service life. Typically a coarse grade can be used after a 120 grade zirconium to give hand rails a brushed finish with suitable grip. The grades are based on Coarse (approx 150-180 DP1 finish), Medium (approx 220-240 finish) and Very Fine (approx 320-360 finish).

Specification:

  • Made with non-woven abrasive material.
  • Low stretch backing.
  • Quality ground and taped joints.
  • Popular sizes listed. Others can be made to order - please enquire.
  • Sold in packs of 10 belts.

 

Free Delivery Within UK

Min order charge, just £15.00 + VAT. Smaller orders are accepted on payment of a Small Order Admin Fee of not more than £5.00 + VAT.

Orders up to £29.99 in value will be sent on a 2-3 day service, by post or carrier. Orders of £30 + VAT and larger will be sent by express delivery, giving next day service throughout most of UK and 2 days to Northern Ireland and remote areas.

You can upgrade your delivery to 'Before 1.00pm' for £5.00 + VAT and to Saturday delivery for £10 + VAT in areas where our carrier offers this service. Please contact us if you have an special requirements.

 

Tube Finishing Machine Belt Size Guide
 
The following belt sizes are suggested by the machine manufacturers. Where, there is significant movement on the jaws, it may be acceptable to use a belt size slightly shorter than listed, eg a 610mm belt instead of 620mm.
 
Machine:
 
FiniTube: 675x40mm
 
EDX E20: 760x40mm
 
Fein RS12-70E: 820x20 and 820x40mm
 
Garboli SM: 675x40mm
 
Metabo RB18LT: 533x30mm
 
Metabo RBE 12 180: 760x40mm
 
PIPE-MAX: 780x40
 
PIPE-SNIPPER: 780x40mm
 
Poly-Romy: 820x40mm
 
ROTO-BELTER: 620x40mm or 620x20mm
 
ROTO-TUBE CH: 650x30mm
 
ROTO-TUBE GRI: 820 x 12, 15 or 35mm 
 
ROTO-POL: 820 x 10, 20 or 40mm
 
ROTO-TUBE BOA: 760 x 20 or 40mm
 
Suhner UTG9-R: 610x30mm
 
Suhner UTG7-R: 533x30mm

Related Products
Aluminium Oxide Tube Finishing Belts (JF4T)

Aluminium Oxide Tube Finishing Belts (JF4T)From:  £15.64

Aluminium oxide, JF4Top, belts are ideal for tube finishing in finer grades from 120 to 400.

Zirconium (TZ59) Tube Sanding Belts - Packs of 10.

Zirconium (TZ59) Tube Sanding Belts - Packs of 10.From:  £11.90

Zirconium belts are in grades 40 to 120 and are ideal for stainless steel.