Finiteasy Unitised Wheels

Applications: These wheels are all 150mm diameter and are designed to fit the Finiteasy machine. The wheels have 25.4mm centres and suit the flanges on the Finiteasy, but they could be used on other machines which run at suitable speeds, using similar 25.4mm (flanges). Together with long arm machines such as Finiteasy, these wheels make corner weld removal, cleaning and polishing much easier. Suitable for steel, stainless steel and aluminium.

Chose a lower grade for a finer finish and a higher grade for more aggressive. 'SA' types are a good general purpose choice for stainless steel. 'MA' types give faster stock removal. 'TA' type is for fastest stock removal. For more guidance on selection, click the tab above.

Specification:

• Made with non-woven abrasive base, re-processed in unitised form.
• Available in 6mm widths in all grades.
• Denser grades 7 and above are also available in 3mm width.
• Packed in 6s but also sold singly.
• Suitable for use on stainless steel.

Delivery Options:

We will normally dispatch orders received by 3.00pm on any working day, that same day.

British Mainland:

Orders valued at below £50.00 + VAT will be given the default 2-3 day delivery at a charge of just £3.00, unless next day delivery is selected at just £5.00. Orders valued £50 or over + VAT will be given free express delivery. This will be next working day for most of Great Britain but a little longer in some remote areas.

We can offer a faster 'Before 1.00pm' option for deliveries to most of mainland Britain for an extra £4.00 + VAT.

Saturday delivery is available for most parts of Britain for an extra £10.00 + VAT.

Northern Ireland:

Orders up to £49.99 + VAT: £12. Orders £50 - £99.99 + VAT: £7.00. Orders over £100 + VAT: Free

Deliveries Outside UK:

Ireland: This website is now enabled for the Republic of Ireland. If you are VAT registered we can provide VAT-free shipments.

Other Countries: We have carrier contracts that enable us to deliver to most countries. Please ask us for a quote if requiring delivery outside of UK.

Finit-Easy Wheels Selection Guide

There is a superb range of Finiteasy wheel options within the new Cibo 'Rebel One' range. The following notes are to help you select the best for your process.

Density: In general, the denser the wheel, the more aggressive. Starting at grade 5 for polishing with light material removal capabilities, up to grade 10 for rapid material removal.

Wheel Make-Up

Three formats of wheels are offered:

'SA' is the most widely used general purpose range. Made with silicon carbide abrasive, these wheels are highly effective on stainless steel fillet welds. Use grade 7 for weld removal and grade 5 for a lighter touch and brighter polish. Available in grades 5,6, 7 and 10.

'MA' wheels use aluminium oxide abrasive and give a more rapid rate of materials removal and coarser finish than SA wheels of the same density. They are thus better than SA wheels at removing milling lines and deeper scratches. Available in grades 5-8.

'TA' wheels use structured abrasive for rapid grinding action. Use when fast metal removal performance is required. These are hard wheels in grade 9.

Other Finit-Easy Wheel Options:

Felt Polishing: After pre-polishing with grade SA5, a felt wheel with polishing compound can be used to bring up a bright polish.

Wire Wheel: We stock a stainless steel twisted knot brush wheel to fit the Finiteasy. These are ideal when aggressive cleaning or coating stripping is required, but without significant material removal.